Test phantom for the acceptance and constancy tests of digital mammography exposure equipment per PAS 1054 (as per September 2005). Available in two standard as well as customer-specific configurations:

PAS phantom for the acceptance and constancy tests consists of:

• 40 mm basic test phantom with PMMA step wedge
• 40 mm basic test phantom with aluminum step wedge
• structure plate with rotatable 5/6/7/8/10 lp/mm lead line resolution test pattern
• AT+CT-MDP test plate
• PMMA test plate
• HK test plate
• KRV test plate
• 3 x 20 mm PMMA absorption plates
• 1 x 10 mm PMMA absorption plates
• 1 x 6 mm PMMA absorption plate

PAS phantom for the constancy test consists of:

• 40 mm basic test phantom with PMMA step wedge
• structure plate with rotatable 5/6/7/8/10 lp/mm lead line resolution test pattern
• CT-MDP test plate (optional AT+CT-MDP test plate)
• PMMA test plate
• HK test plate
• 2 x 20 mm PMMA absorption plates
• 2 x 10 mm PMMA absorption plates

Both test phantoms are supplied with a robust transport case.

Optional 20 mm x 24 cm x 30 cm absorption plate available.

Test phantom for quality assurance of all conv. mammography systems.

Suitable for both the constancy test per DIN 6868, Part 7 and the acceptance test per DIN 6868, Part 152.

The DIGMAM phantom can be used to perform both the acceptance and the constancy tests of digital mammography exposure units.

The test phantom is equipped with a lead bar resolution pattern with special range (5,6,7,8,10 LP/mm) for digital mammography units.

Test phantom for monitoring the technical parameters of mammography imaging systems per the requirements of the "European Guidelines for Quality Assurance in Mammography Screening".

A supplementary phantom for use with mammography phantoms.

For inspection and analysis of the current radiological image quality of the total mammography system, in addition to the acceptance and constancy tests.